Comment on Stumped - Improving fine detail prints with a .2mm nozzle?
okwhateverdude@lemmy.world 1 week ago
Can you share a screen cap of the mesh so we can see what it supposed to look like? It is difficult to see what the center is supposed to be.
One thing I can see in your print, it is looks like your hardware struggles with arcs or you’ve configured cura weirdly to not use arcs.
If the center bit is supposed to hold a T-shape (like a philips head screw driver), you probably need to play with the number of walls vs fill (i’d probably make that all walls).
Image
okwhateverdude@lemmy.world 1 week ago
Okay! That makes it really clear. How does the gcode pathing look for the center bit? Does it pick up and travel any? I bet the blobbing you’re seeing is because of infill/walls for those very tight angles. Something that might print a bit better on your printer is to round off the points in the corners and switch to all walls.
I think the thing I’m fixated on now is getting those layers to take longer to print. I posted on the Cura forums, and they think there’s a specific G-code that’s not getting respected. They are describing it as a firmware bug, and if I figure that out, I may be able to develop some sort of a substitution automatically.