Comment on Using DVD slot for second 3.5" drive?
adarza@lemmy.ca 1 week ago
you’re talking the ‘RED’ series inspiron minitower?
iirc there’s only one 3.5in bay adjacent to the slimline optical bay, and two 2.5in bays in a cage at the bottom front.
bays use drive rails which may or may not be present if the bay was unpopulated when originally shipped.
the pc uses 12vo power supply, so the drives are powered off the motherboard. those cables may also not be present if they weren’t needed for the original configuration.
slimline optical bays can often be removed and replaced with a 2.5in caddy designed fit in the form factor, connecting to the optical power and sata, and hold a 2.5in ssd drive.
dirtycrow@programming.dev 1 week ago
yep, that one. They claim it has a 2tb hd in it so the 3.5" is most likely populated, but good catch! I have extra cables lying around, so that won’t be a worry.
I hope not too creative. I think there’s some standard adapter online.
adarza@lemmy.ca 1 week ago
you aren’t putting a 3.5in in that slimline bay. you can probably rig something to hold one there, though. that’s where the get ‘‘creative’’ part comes in.
you also have the 2x2.5in at the bottom but you’re missing the rails or caddies for them. should be like 5-6 bucks each or so on ebay or azn. don’t bother with those, though, unless you’re putting in hdd there. sata ssd can just be stuffed in the cage, they ain’t going anywhere.
be careful with whatever mb->sata power cables you have. make sure they’re the correct ones, as they aren’t all the same. you could get away with a 1->2 sata power splitter once on each mb power connection, as the output of each is designed for 2x3.5in hdd anyway.