Comment on Continuous Print Fails

bradons@lemmy.world ⁨9⁩ ⁨months⁩ ago

• KiloGex@lemmy.world ⁨9⁩ ⁨months⁩ ago

  Somewhat. It’s in my basement and it usually hovers around 50* in there until the summer (which it is not).

  source

  • roofuskit@lemmy.world ⁨9⁩ ⁨months⁩ ago

    I’m assuming you don’t mean 50C. This is your problem. You need to buy or build a heating solution for your printer. There are many commercial products available. You need a temperature 75F or higher for resins before you print. Some print best at 80F+.

    source

    • bradons@lemmy.world ⁨9⁩ ⁨months⁩ ago

      Exactly. I was printing fine, then winter came, and everything started to fail. Got a cheap fermentation Heating Belt wrapped around my vat and everything was working great again Then I wasn’t being diligent about cleaning my plate and started getting fails until I realized the issue.

      source
    • KiloGex@lemmy.world ⁨9⁩ ⁨months⁩ ago

      Great! Thank you so much for the help. I’ll start researching!

      source

      • roofuskit@lemmy.world ⁨9⁩ ⁨months⁩ ago

        The cheapest and easiest trend to be the Brewers bands. People wrap them around their resin vats.

        youtu.be/IHA4aUJdG80

        youtu.be/bQmmGj6gMdk

        I built the one in the second video but there weren’t as many out of the box solutions back then.

        source
  • rainrain@sh.itjust.works ⁨9⁩ ⁨months⁩ ago

    Im presently doing all my printing via craftcloud. It seems too expensive and fiddly to do it myself. But I’ve got this room where, if I get a printer, I’ll put it.

    So if I do it like a humidor. Controlled environment and ventilation. Is this the normal thing to do?

    source