Comment on Anyone got ideas on how to fix this bulging issue with thin prints?
Lasherz12@lemmy.world 3 weeks ago
It looks like the effects of heat warping if it’s all confined to the middle. First step is to allow the bed to heat up longer imo. The center might holding heat better or worse than the rest and needs longer to equalize. Is your printer enclosed? If so that should solve it. If it’s not then you may have excessive airflow across the bed.
NoFood4u@sopuli.xyz 3 weeks ago
Thanks for the reply. The bed already gets way more time than it needs to heat up so that part is fine. Printing it a lot slower will probably help equalize temperature tho. I’ll try that and we’ll see if it works.
Lasherz12@lemmy.world 3 weeks ago
You also could also attempt different patterns if you feel it’s the tip causing localized heating. Spiral is going to make the center hotter than the outside. Diagonal sweeps are going to do the opposite.