dudeami0

@dudeami0@lemmy.dudeami.win

• ⁨Comment⁩ on ⁨Is it generally safe to walk through a field of cows?⁩ ⁨⁨6⁩ ⁨days⁩ ago⁩:

  From my understanding, you are pretty safe as long as you don’t provoke them (walking through the middle of them might be considered provoking) or near their calves. This article from the UK states “Where recorded, 91% of HSE reported fatalities on the public were caused by cows with calves”. Basically, mothers with a child are going to be very protective.

  Cows are a domesticated creature, so they are generally docile, but I would exercise caution because if need be they will use their mass and strength against you. I’ve heard of stories of farmers running from cows and narrowly escaping under a fence. Most of these did involve a farmer trying to separate a calve from it’s mother. I’ve also heard stories of cows jumping fences.

  And as far as memes go:

  Image

• ⁨Comment⁩ on ⁨Cloudflare Alternative⁩ ⁨⁨3⁩ ⁨months⁩ ago⁩:

  This might help, sorry if it doesn’t, but here is a link to CloudFlares 5xx error code page on error 521. If you’ve done everything in the resolution list your ISP might be actively blocking you from hosting websites, as it is generally against the ISPs ToS to do such on residential service lines. This is why I personally rent a VPS and have a wireguard VPN setup to host from the VPN, which is basically just a roll your own version of Tailscale using any VPS provider. This way you don’t need to expose anything via your ISPs router/WAN and they can’t see what you are sending or which ports you are sending on (other than the encrypted VPN traffic to your VPS of course).

• ⁨Comment⁩ on ⁨Please Stop⁩ ⁨⁨3⁩ ⁨months⁩ ago⁩:

  A blockchain is just an verifiable chain of transactions using cryptography and some agreed upon protocol. Each “block” in the chain is a block of data that follows a format specified by the protocol. The protocol also decides who can push blocks and how to verify a block is valid. The advantages it has comes from the fact the protocol can describe a method of giving authority across a pool of untrusted third parties, while still making sure none of them can cheat. Currently the most popular forms are Proof of Work (PoW) and Proof of Stake (PoS).

  Bitcoin for example is just an outgoing transaction to a specific crypto key (which is similar to a checking account) as a reward for “mining” the block, followed by a list of transactions going from a specific account to another account. These are verified by needing a special chunk of data that turns the overall hash of the entire block to a binary chunk containing a number of 0 bits in front, which makes it hard to compute and a race to get the right input data. This way of establishing an authority is called Proof of Work, and whoever is first and gets their block across the network faster wins. Other cryptocurrencies like Ethereum use Proof of Stake where you “stake” currency you’ve already acquired as a promise that you won’t cheat, and if someone can prove you cheated your stake is lost.

  The problem it solves is not needing a trusted third party to handle this process, such as a government agency or an organization. Everyone can verify the integrity of a blockchain by using the protocol and going over each block, making sure the data follows the rules. This blockchain is distributed so everyone can make sure they are on the same chain, else it’s considered a “forked” chain and will migrate back to the point of consensus. This can be useful for situations where the incentive to cheat the system for monetary or political gain outweigh the cost of running a distributed ledger. It can also be useful when you don’t want anyone selectively removing past data as the chain of verifiability will be broken. The only issue with this is you need some way to reach a consensus of who gets to make each block in the chain, as someone need to be the authority for that instant in time. This is where the requirement of Proof of Work (PoS) or Proof of Stake (PoS) come in. Without these or another system that distributes the authority to create blocks, you lose the power of the blockchain.

  Examples I’ve heard of are tracking shipments or parts (similar to how the FAA already mandates part traceability) and medical records. This way lots of organizations can publish records relating to these to a central system that isn’t under any single entities control, and can’t change their records to suit their needs.

  These systems are not fool proof though, PoW has the ability to be abused using a 51% attack and PoS requires some form of punishment for trying to cheat the system (in cryptocurrency you “stake” currency and lose it if you try to cheat the system). Both of these run into issues when there is no incentive to invest resources into the system, a lack of distribution across independent parties, or one party has sufficient power to gain a majority control of the network.

  Overall you are right to be skeptical of cryptocurrency, it’s been a long time since I participated due to the waves of scam coins and general focus on illegal activities such as gambling. The lack of central authorities also perpetuates the problem of cryptoscams, as anyone can start one and there are limited controls over stopping such scams. This is not dissimilar to previous investment scams though, it’s just the modern iteration of such scams. The real question is does it solve a real problem, as Bitcoin did in the sense it helps facilitate transactions outside of government controls. You might not agree with that but it does give it an intrinsic value to a large number of people looking to move currency without as much paperwork. Now if it makes it worth $68.5k USD (at current prices) is a different story, different people have different use cases and I only highlighted one of those.

• ⁨Comment⁩ on ⁨Running multiple shiori instances⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:

  I’ve never ran this program, but skimmed the documentation. You should be able to use the SHIORI_DIR (or a custom database table following those instructions) along with the -p argument for launching the web interface. A simple bash script that should work:

  export SHIORI_DIR=/path/to/shiori-data-dir
  shiori -p 8081
  

  To run multiple versions, I’d suggest setting up each instance as a service on your machine in case of reboots and/or crashes.

  Now for serving them, you have two options. The first is just let the users connect to the port directly, but this is generally not done for outward facing services (not that you can’t). The second is to setup a reverse proxy and route the traffic through subdomains or subpaths. Nginx is my to-go solution for this. I’ve also heard good things about Caddy. You’ll most likely have to use subdomains for this, as lots of apps assume they are the root path without some tinkering.

• ⁨Comment⁩ on ⁨Is there something better than SQL?⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:

  SQL is the industry standard for a reason, it’s well known and it does the job quite well. The important part of any technology is to use it when it’s advantageous, not to use it for everything. SQL works great for looking up relational data, but isn’t a replacement for a filesystem. I’ll try to address each concern separately, and this is only my opinion and not some consensus:

  Most programmers aren’t DB experts: Most programmers aren’t “experts”, period, so we need to work with this. IT is a wide and varied field that requires a vast depth of knowledge in specific domains to be an “expert” in just that domain. This is why teams break up responsibilities, the fact the community came in and fixed the issues doesn’t change the fact the program did work before. This is all normal in development, you get things working in an acceptable manner and when the requirements change (in the lemmy example, this would be scaling requirements) you fix those problems.

  translation step from binary (program): If you are using SQL to store binary data, this might cause performance issues. SQL isn’t an all in one data store, it’s a database for running queries against relational data. I would say this is an architecture problem, as there are better methods for storing and distributing binary blobs of data. If you are talking about parsing strings, string parsing is probably one of the least demanding parts of a SQL query. Prepared statements can also be used to separate the query logic from the data and alleviate the SQL injection attack vector.

  Yes, there are ORMs: And you’ll see a ton of developers despise ORMs. They is an additional layer of abstraction that can either help or hinder depending on the application. Sure, they make things real easy but they can also cause many of the problems you are mentioning, like performance bottlenecks. Query builders can also be used to create SQL queries in a manner similar to an ORM if writing plain string-based queries isn’t ideal.