shelf
@shelf@lemmy.dbzer0.com
- Comment on I made a custom arcade stick 4 hours ago:
I’ll probably be following this suggestion I’d love to use a higher tension grommet in my lever but the controller would have to be a lot heavier for it not to be problematic.
- Comment on I made a custom arcade stick 6 hours ago:
yeah I didn’t know /c/arcadesticks@lemmy.world existed until somebody cross posted this post there. I want to remake the wrist rest out of wood eventually to add more weight. Your hitbox looks pretty sick!
- Comment on I made a custom arcade stick 7 hours ago:
I considered it but i test drove the setup without it and wasnt bothered by them poking out so I decided against it. plus i like the brutal look
- Comment on I made a custom arcade stick 8 hours ago:
for sure! I think the captive nut + oversized hole solution is a lot more forgiving and accessible you can buy all the stuff you need from any local store and it doesn’t have to fit PERFECTLY cause everything just pulls itself into the right spot based on the lip of the 3d printed parts.
- Comment on I made a custom arcade stick 9 hours ago:
I put the holes in the side to save filament but ended up making a snap in panel for the start/select/home buttons so that was a happy accident. also I have since replaced the arcade stick bolts with button top hex head bolts so they fit better and look nicer and don’t feel like hell when you drag your hand across them.
- Submitted 10 hours ago to 3dprinting@lemmy.world | 11 comments
