JelleWho

For reference, just to show the ‘apple’ factor.

Bambu had “accedently force pushed” an updated to all printers before, that locked them to only able to print with confirmed Bambu Lab filament.

That this is even an option they invested research time into boggles my mind.

I personally avoid Bambu like the plage

If you are looking for the same performance and feature set (bot not a PR nightmare and locked eco system) look at Snapmaker U1.

If you wish to not break the bank as much, and just want something more simple and cheaper. I belive Creality still makes decent options.

Prusa is the best, no questions. But they are also the most expensive

Yhea true, but its such a drag waiting for 8h for a print. And then all your icons are just not coloured. Just need to change the gcode and then try again

Trying to print dual colour on a single colour printer, but then forgetting the pause layer to manually swap the colour. Ending up with single colour print,

I need this for my work, they want everything thing done by yesterday.

I think it needs a bit of airflow. Unless your trying to make plasma

Can here to say the speed is too high indeed.

The extruder can not keep up at the high speeds. It has acceleration on. And in the beginning it’s slow enough, but at the middle/end it’s under extruding. It goes sigzag so that’s why the patter looks like this.

Reduce speed, or get an higher flow nozzle/gantry/extruder

Hey welcome to the hobby!

We personally have the whole TV on a Vlan, so it can’t acces anything at all. While our server/HA can still send a WOL command to it, and jellyfin can stream our movies to it. I run all of it on top of TrueNas, most as an app or else an VM.

I have never tried to set something up for YouTube specifically, since that runs on a Chromecast (for now…)

Let me know how your journey goes

Yhea but it’s good to know that HA is able to do so. To the menu/backend does support it. Just need to find the right app now I suppose

So a bit outside the box of your question. Home Assistant does have an option to replace the assistant on your phone. Could you try if this also shows up for the squeeze feature?

Only watch out for condensation, temperature should be fine for well below 0C.

Also the act of printing in such space does not like it to be too cold. Your quality would start to fail. But I have successfully printed at 5C before and your ymnot trying to print there (yet… ) Another note is that your bed/nozzle temps are expected to be withing limits, mine can’t be below 0 to start printing.