tensor_nightly69
@tensor_nightly69@lemmy.world
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 1 week ago:
That’s the exact guide I’m currently working my way through 👍
- Comment on Anyone tried cloud gaming? 1 week ago:
Just enable it in the BIOS, then make sure the network card has it enabled in Device Manager, and it works like magic (packets).
- Comment on Anyone tried cloud gaming? 1 week ago:
I’ve been doing it since before the Steam Deck came out, and I just enabled WoL, so the computer sleeps until I open Moonlight and try to access it, then it wakes up. Same with local LLM processing.
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 2 weeks ago:
Yeah, I unfortunately noticed that I didn’t get the CHT high flow nozzle, just the regular brass one. With my tests and high temps, I was only able to get right around 30mm/s^3^, so I need to order the high flow nozzle, which they advertise being able to get up to 50mm/s^3^.
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 2 weeks ago:
I suffered 3 long years endlessly upgrading, tweaking, and maintaining an Ender 3, so I definitely know your pain! 😂
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 2 weeks ago:
Yep, you’re exactly right! I forgot that I have the volumetric speed capped at 25 for the Turbo PLA (based that off of random reported values other people used, but didn’t think to try and benchmark it yet). So I’m gonna do that right now! The Overture Matte PLA also prints incredibly cleanly at 300mm/s, so I’m going to benchmark it and the Turbo PLA to see how high this hotend can go. I’ll report back when finished.
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 2 weeks ago:
I just realized that I have that capped, and I’m now running some flow rate tests on my different filaments. I’ll make another post with the highest flowrate I achieve 👍
- Comment on Calibrating my E-steps ended up giving me nearly pixel-perfect prints (Creality K1) 2 weeks ago:
Heh - I currently have everything set up for the glass bed mod, except I just read that it doesn’t work with the CR touch sensor, so I’ll need to get a BT Eddy sensor or sonar something. I’ll also need to print a new gantry, and I’ve already tried one that didn’t work as well as the stock one, so just waiting to do more research on that, and then I’ll have my glass bed all set up!
- Submitted 2 weeks ago to 3dprinting@lemmy.world | 15 comments
- Comment on Why don't these AI data centers build by the ocean? 2 weeks ago:
Radiohead?
- Comment on Proxmox 9 released 2 weeks ago:
Or JetKVM 🤗
- Comment on Youth Demand protestors block US-based tech company Cisco’s pride float to protest their participation in Palestinian genocide 1 month ago:
Good ✊
- Comment on Two Israeli embassy staffers shot dead in Washington 3 months ago:
- Comment on Hottest Star Trek character? 4 months ago:
14/18
- Comment on DIY Sonos Project 5 months ago:
I don’t know how he comes up with his ideas, but they are all pretty phenomenal and novel. Great channel to subscribe to for some creative fuel every once in a while!
- Comment on DIY Sonos Project 5 months ago:
If you don’t want to worry about latency/etc - you should consider doing it with lasers 😈.
- Comment on [deleted] 5 months ago:
💯
- Comment on we are not so different 5 months ago:
Neslie Lope had it right.
- Comment on A quarter of US shoppers have dumped favorite stores over political stances 5 months ago:
Keep it up!! 👊
- Comment on [deleted] 6 months ago:
Do this. You won’t regret it. The website makes it nearly a one-click operation, and you then have one of the most private, secure operating systems there is right now.
You can even go grab a 6a or 8a or something on eBay for cheap, and get the great GrapheneOS experience.
- Comment on This is the first silent home wind turbine that destroys solar panels - 1500 kWh of free electricity 6 months ago:
Very cool! Is it printable?
