abcdqfr

You can also busy edit local records on the devices you intend to access the service from. Flakier, but requires no extra hardware/services

Very cool! Still so much innovation to be uncovered in FDM printing even today. Exciting project!

Bought low? Sell high! Or will you somehow extract more value from it before it dies??

Where has this bot been all my life? So many cryptids dropping undeclared acronyms everywhere at all times.

disk repair shops aint cheap. you go there when you lose data and NEED it back, not to top up on Helium like party balloon. Also balls expensive. You’d need a clean room just to open the thing. AFAIK there are no service ports to just chooch in more helium.

Let’scrypt and port forward. Sprinkle on some free ddns with a sync script/job to keep ddns pointing to your real public IP. Can even roll in some headscale if you’re feeling adventurous

ANOTHER HAND touches the beacon!

Thermal expansion is real. Have experienced loose nozzles when only cold tightened. Also as others have said, ensure belts are tight. If they’re floppy enough to skip teeth on the steppers you’ll definitely get layer shift from a light breeze. Monitor the next test and let us know how it goes!

Test failed successfully. Excess material hit the bed, cooled, head collided on next pass, layer shift. Keep the head clean and fine tune to eliminate over extrusion. If bed is not level and first layer bungled, same story after leveling and cleaning bed