31ank
@31ank@ani.social
- Comment on Are there other options than Prusa/BambuLab? 2 weeks ago:
I currently print TPU 90A with my Anycubic Vyper and it works great even thou it’s a bowden setup. It’s IMO a great material if you need something that is kinda soft, you should really try it out! But from what I read the MMU doesn’t really like TPU, but I think there are multiple versions of the MMU so maybe the newer ones are capable of handling TPU? Gonna check that again.
Also I thought I read somewhere that TPU/PLA didn’t have the same problems like PETG/PLA or PLA/ABS/ASA, but I will check it again. Thanks for the input!
- Comment on Are there other options than Prusa/BambuLab? 2 weeks ago:
I have access to a BambuLab P1S at work and it’s so much faster and produces better quality prints than my Anycubic Vyper, it’s astonishing what happened the last view years thanks to CoreXY. I will check out the Elegoo, thanks for the recommendation!
- Comment on Are there other options than Prusa/BambuLab? 2 weeks ago:
Thanks, didn’t knew about the Qidi. And even thou its 1k€/$, its still a half the price of the BambuLab or Prusa!
- Submitted 2 weeks ago to 3dprinting@lemmy.world | 12 comments
- Comment on What is your ideal ambient humidity? 4 months ago:
It heavily depends on the material if it will print fine at higher humidity, but having around 20-35 seems good afaik. I printed PLA successfully at around 55% for a long period before switching rooms and never had problems, but I wouldnt store PETG/TPU there without a sealed box
- Comment on MF GHOST Season 2 • MF Ghost 2nd Season - Episode 12 discussion 5 months ago:
Its from the same author afaik
- Comment on No Google Cloud for 12 hours due to power outage. 7 months ago:
You could also say its AWS. They also should have zhe experience, but mistakes happen