Wasgaytsiedasan

@Wasgaytsiedasan@feddit.de

This is a remote user, information on this page may be incomplete. View at Source ↗

⁨Comment⁩ on ⁨Amazon should've made Prime Day fall on a date corresponding to an actual three-digit prime number.⁩ ⁨⁨3⁩ ⁨months⁩ ago⁩:
You can only use this method to check if the number can be divided by 3.
⁨Comment⁩ on ⁨Why do some languages use gendered nouns?⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:
He was showing how gendered words can resolve ambiguity in an example were this also applies in english, so that you can extrapolate to situations like the one I (or the other replies) showed.
⁨Comment⁩ on ⁨Why do some languages use gendered nouns?⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:
Zehzins example is also true for objects. “After the cat jumped on the table with the glass and the bowl it pushed it down.” Did the cat push down the glass or the bowl? In german for example it’s “Nachdem die Katze auf den Tisch mit dem Glas und der Schüssel gesprungen ist, hat sie sie heruntergestoßen.” (In this case the bowl) or “Nachdem die Katze auf den Tisch mit dem Glas und der Schüssel gesprungen ist, hat sie es heruntergestoßen.” (In this case the glass).
⁨Comment⁩ on ⁨Sometimes fewer walls are better⁩ ⁨⁨8⁩ ⁨months⁩ ago⁩:
No, that shouldn’t be obvious. First of all, the reason a bundle of hair is stronger and stiffer than a rod of equivalent area and material, is not necessarily applicable at the scale of 3D printing layers (there should be an effect, but it gets much more prevalent in smaller scales). Then second, your example with the CFRP Sandwich Panel is not really correct. A full thickness CFRP plate is going to be stiffer and stronger than a Sandwich panel. Will it be much heavier and much more expensive? Yes! Will it be stiffer and stronger? Yes, a little bit. Only specific properties (so, per kg or per dollar) are improved (and by significant amount). Also the core has to withstand out of plane shear in addition to compression and the bending stiffness is highly dependent on this shear stiffness. My assumption for OPs effect is, that the criss-cross pattern is stiffer than the interlaminar shear stiffness of the individual 3D printed layers (but thats just a guess, could also be a quality aspect). This is not true for CFRP Sandwiches. CFRP interlaminar shear stiffness is much higher than of the core material (at least in general). Sorry, don’t want to come across as an ass :)