Hamknight

Going with a cheap used system, and then adding an Intel a310 is a good start. For getting drives, look into getting some external Seagate drives, popping them open, and using them internally. Just a couple ideas 😊

Tdarr is a pretty fun automation tool if you Wana try. Basically I down scale to 1080p if it’s higher, then I rencode to av1 at 8mbps or lower depending on current bitrate

Does it help to point out this is vinyl backed foam 😉 really thin vinyl sheet on it, but it helps

Oh! Just the stock webpage

Yea it’s mobile. Away from home for a bit 😅

It’s in the middle of rencoding my library, should finish at some point and return to low usage

I get about the same affect by placing a layer of the foam on the wall behind the fans. But you’re totally right. Without that lil bit the fan noise from the intake and exhaust was a lil noticeable

With the big tower cooler it now has in the server it barely touches 80c under load. As for sound, I can take a recording when I get home later this week if anyone’s are still interested

Two of the drives are 18tb I got cheap 😂 so maybe in a decade I’ll get that 8tb of space

I keep my place at 74, and basically have a per room heat pump to never have the temp be an issue even on a 108 day. I’ve been running the setup for over two years now and have monitored thermals the whole time and have never had an issue. I understand the concern, and had the sane concerns at first too, but the results don’t lie

I9 11900k and about 18 spereate sata drives. The lil amounts add up 😂

They basically just sit and spin with all reads going to a cache nvme drive 😊 should live as long as possible

Was just what I was experimenting with when I built it a few years ago. Never gave may issues so I’ve just stayed with it. Would be nice to be able to mismatch my drive size though

It’s alot of fun. NSFW makes some really easy to build in ITX cases if you ever want to dabble. My req though is too put a baffle made of stuff foam to force cool air in for the gpu. I’ll post a Pic of my main setup when I get home later this week if you want

Lol. I mistyped tennis so many times 😂

Yea, I definitely would have gone z2, but this all started with the drives, and slowly expanded into this monster. But so far it’s been running smooth. The drives were added at different times to so they shouldn’t fail at the same time (hopefully 😂)

It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream

127.0.0.1 sweet 127.0.0.1

I posted specs and temps if you were curious 😊

I shall now my known as Sir Hamknight of Tennis 😂❤️🎾

Super quiet, and had been running non stop for over a year no with no problems 😊 also that i9 runs super hot. When it was in my lil gaming rig it was always running up near 90. So retiring to the server had been much more gentle on it, lol

Plus the other fan hiding behind the system 😉 posted temps in a comment of you eye curious

Surprisingly the server is pretty good on pretty usage. It pulls about 300-350w from the wall, so probably about $50 a month. For being my security system and media server is pretty cost effective

Thanks! Has been alot of fun playing with

Here’s my tdarr flow. I have redundent paths to handle if qsv fails and to retry in software if you’re curious of why it splits

Image

Also, here’s my lil gaming rig too. Runs warm, but it’s tiny.

Image

Image

It’s a 9800x3d paired with a 6800xt

That’s crazy! That would be such a fun system to play with for a silent transcoding setup. Thanks for sharing 😊

My dang autocorrect last night refused to use the word temps 😂 caught it on most of my replies, but it slipped past a few times

Oooo, cute mini system! I’ve always wanted to start a cluster with tiny towers like that

This post here. I fixed it on most replies, but SwiftKey did not like me using the word temp

Or spaceballs 3, the search for spaceballs 2