Cooljimy84

@Cooljimy84@lemmy.world

• ⁨Comment⁩ on ⁨The UK section of my local supermarket is taking the piss⁩ ⁨⁨2⁩ ⁨months⁩ ago⁩:

  But beanz meanz Heinz…

• ⁨Comment⁩ on ⁨Proxmox rebuild⁩ ⁨⁨2⁩ ⁨months⁩ ago⁩:

  I run snapraid and mergerfs, as the nas storage. Not much changes on my NAS and the stuff I really care about like my pictures and videos are on a small ZFS pool. Both are directly on proxmox, meaning I can just plug them in to another Linux machine and research if it all goes sideways.

• ⁨Comment⁩ on ⁨How can I get a screw like this out?⁩ ⁨⁨2⁩ ⁨months⁩ ago⁩:

  You could also padding out the screwdriver tip or the screw hole. I’ve used sticky tape before, but again if its tight your pretty much out of luck…

• ⁨Comment⁩ on ⁨How can I get a screw like this out?⁩ ⁨⁨2⁩ ⁨months⁩ ago⁩:

  Depending how tight it is you could superglue something to it to turn it ?

• ⁨Comment⁩ on ⁨Help figuring what the two non SAS ports are⁩ ⁨⁨4⁩ ⁨months⁩ ago⁩:

  Looks like a cpu/gpu power connector. Even if its a standard plug does not mean its a standard pin out ! Craft computing on YouTube had what looked like a standard plug in his server but it had a 12volt and ground switched, so would have caused some real damage

• ⁨Comment⁩ on ⁨Can the SATA-to-USB adapter affect the result of the bad sectors scan?⁩ ⁨⁨4⁩ ⁨months⁩ ago⁩:

  I second this, when a drive shits the bed a sata controller handles it better, some times with a USB adapter you mess the whole bus up and need a reboot of the machine (from using them on windows experience)

• ⁨Comment⁩ on ⁨Planning on setting up Proxmox and moving most services there. Some questions⁩ ⁨⁨10⁩ ⁨months⁩ ago⁩:

  With arr services try to limit network throughput and disk throughput on them, as if either are maxed out for too long (like moving big linux iso files) it can cause weird timeouts and failures

• ⁨Comment⁩ on ⁨pooling media libraries - like distributed storage⁩ ⁨⁨10⁩ ⁨months⁩ ago⁩:

  Another one to have a search for is IPFS.

• ⁨Comment⁩ on ⁨File size preference for Radarr?⁩ ⁨⁨10⁩ ⁨months⁩ ago⁩:

  It always throws me when I see at 1080 movie less than 5gb, then I scroll across and see it’s x265…

• ⁨Comment⁩ on ⁨Completely free⁩ ⁨⁨11⁩ ⁨months⁩ ago⁩:

  Web hosting is free, but the extras are non-optional andcoast money LOL

• ⁨Comment⁩ on ⁨VPN to home network to access PS4 doesn't work via PS Remote Play app⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  Both devices need the same subnet mask, otherwise only one can see the “extra addresses” but in my opnsense I think I and to add some firewall router between LAN & WG0

• ⁨Comment⁩ on ⁨VPN to home network to access PS4 doesn't work via PS Remote Play app⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  So the subnet mask is got from the device handing out dhcp. Not 100% sure but on my android the subnet mash for wireguard is as /24 set on the device and also matching in the wireguard settings in opnsense. Opnsense is very very powerful, I would watch a few videos on YouTube about subneting, wireguard routing & dhcp. Its gonna be quite the learning curve (or could be)

• ⁨Comment⁩ on ⁨VPN to home network to access PS4 doesn't work via PS Remote Play app⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  My friendly 2 pence, my mobile provider me a 10.x.x.x IP with CNAT (carrier grade NAT) when I’m on mobile data.

  Could you not set your subnet mask on the wireguard and home to 255.255.0.0 then you can see the whole 10.0.x.x block in a broadcast?

• ⁨Comment⁩ on ⁨[deleted]⁩ ⁨⁨1⁩ ⁨year⁩ ago⁩:

  You look twice as kids and old people aren’t very good judges of speed. Look twice to make sure u’ve not misjudged the speed of the car/bike/trunk/plane/scooter