Siff
@Siff@mstdn.social
Nerd. Geek. IT consultant with more than 40 years of experience. Experienced 3D designer and 3D printing enthusiast. Certified tennis instructor. Photography lover. Absolute beginner guitar player.
- Comment on Weird first layer issue. 21 hours ago:
@PriorityMotif You might have another (or an additional) thing to look at - there are little holes, which might be due to wet filament. This could also be the cause of the issue you are having - if the filament is too wet, it could cause partial blocking, which might create the thinning lines in the infill. This also would not be very visible in the perimeter.
If you hear pops during the pr8nt, you have wet filament and, if that’s the case, I would suggest that you look into this first.
- Comment on Weird first layer issue. 23 hours ago:
@PriorityMotif Seems that the hot end is too far from the plate.