stooovie
@stooovie@lemmy.world
- Comment on Mozilla 2023 Annual Report: CEO pay skyrockets, while Firefox Marketshare nosedives 1 year ago:
You and I and everyone on Lemm are a rounding error.
- Comment on Mozilla 2023 Annual Report: CEO pay skyrockets, while Firefox Marketshare nosedives 1 year ago:
There was also no reddit migration.
- Comment on Majora's Mask on a Bambu Labs X1C 1 year ago:
The amount of waste and time it takes are downright insulting
- Comment on An Audacious Plan to Halt the Internet's Ensh*ttification ... 1 year ago:
That’s capitalism - it’ll gladly sell you even its own criticism
- Comment on Unable to print TPU 93A 1 year ago:
I did, check my comment.
- Comment on Unable to print TPU 93A 1 year ago:
Completely new and dried for 24 hours in a dedicated dryer. Thanks.
- Comment on Unable to print TPU 93A 1 year ago:
SOLUTION: runs contrary to common knowledge, but what ultimately helped was:
- INCREASING print speed. The usual recommendation is the slower the better, but at that point, there’s no pressure control over the filament
- ENABLING retraction. Again, usual rec is to disable it for flexibles but turns out it alleviates too much backpressure which leads to filament buckling in the extruder
Also printing hotter than mfg recommends: I printed at 260 (10C over recommended maximum).
Thanks to u/Over_Pizza_2578 for pointing me to the right - opposite to everything else - direction.
- Comment on Unable to print TPU 93A 1 year ago:
Yes, this is probably adding to the situation.
- Submitted 1 year ago to 3dprinting@lemmy.world | 12 comments
- Comment on Why you shouldn't use Brave Browser 1 year ago:
This may be overkill but try Piped.video
It removes all tracking and ada frok youtube and allpws you to import your subscriptions.
- Comment on Why you shouldn't use Brave Browser 1 year ago:
I have absolutely no problem how Brave got the reputation it has. It’s business model is disgusting and extortionate, it’s like paying for warez.
- Comment on Ender of worlds 1 year ago:
I’ll probably buy more of this pink ABS, I find it very pretty
- Comment on Home Assistant - am I missing something? 1 year ago:
So you use the free thing wrong, don’t RTFM, vent on internet and then vent some more when corrected? What’s your end game?
- Comment on I've noticed that lemmy as a whole is much more leftist than reddit (outside of political servers of course) 1 year ago:
good
- Comment on Ender of worlds 1 year ago:
She does ❤️ thanks :)
- Comment on Home Assistant - am I missing something? 1 year ago:
Looks like an user error to me. Influx is for long-term storage of history and data, you don’t need it for automation at all.
- Comment on Home Assistant - am I missing something? 1 year ago:
Absolutely wrong. I have dozens of devices integrated, from a lot of brands, all working. You can of course try to get a turnkey solution from like Loxone, but be prepared to pay thousands of dollars, and good luck adding anything that’s not in their ecosystem. And there’s a lot of that. And what is there is all pretty outdated.
Xiaomi is great and I use a lot of their stuff, but the options for automation are severely limited.
- Comment on Ender of worlds 1 year ago:
Exactly :)
- Comment on Ender of worlds 1 year ago:
I have, but I’m too lazy right now :)
- Comment on Ender of worlds 1 year ago:
oh boy, I don’t have the time for finding specific info and models, but
- PEI sheet
- metal BMG extruder clone from Aliexpress
- hotend cooling fan is a 4020 for lower noise
- shroud is an enlarged stock-like one to accomodate the bigger fan
- PSU fan is a large 8020 with buck converter to lower RPM, with printed case and grille
- drawer, handlebar, base fan cover, filament guide, tool holder and toolbox all from Thingiverse
- my own holder for the Xiaomi phone acting as a screen for Klipper (my first model :)
- Rpi3 with Klipper in the ugly box on the left (printed wrong orientation, it’s bottom up)
- Capricorn PTFE tube
- printed springy feet for lower vibrations
- BLTouch clone by Fysetc
- Creality 4.2.7 silent board
What’s absolutely essential is the dual-gear extruder and the PEI bed. All the other stuff are nice-to-haves.
- Comment on Ender of worlds 1 year ago:
My kitted out Ender 3 with pink ABS accessories I have added over the years. I like the black/pink color combo.
- Submitted 1 year ago to 3dprinting@lemmy.world | 14 comments
- Comment on [deleted] 1 year ago:
Again?
- Comment on James Cameron on AI: "I warned you guys in 1984 and you didn't listen" 1 year ago:
Yes, sure
- Comment on James Cameron on AI: "I warned you guys in 1984 and you didn't listen" 1 year ago:
True but that doesn’t keep it from screwing a lot of things up.