Jellyfin and backblaze b2

Submitted ⁨⁨10⁩ ⁨months⁩ ago⁩ by ⁨crony@lemmy.cronyakatsuki.xyz⁩ to ⁨selfhosted@lemmy.world⁩

I have a jellyfin instance running with radarr/sonarr/… for my media needs on my vps.

Problem is that I don’t have huge amount of storages and I would like to expand the storage until I’m able to make a personal server ( I don’t have space where I live for even a mini pc rn ).

From the options that I have been considering the contabo storage expansion are quite costly so I have been thinking about hetzner storage boxes or a backblaze b2 bucket mounted with rclone/s3fs.

The problem with backblaze is that I use hardlinks with my *arr suite so to save up on space so I’m not sure if I can mount them preserving the hard links.

What would be your thought or reccomendation? Should I get a hetzner storage box and just mount it or is there anything else I could do until I manage to make my own personal server?

source

Comments

Sort:hotnew top

oranki@sopuli.xyz ⁨10⁩ ⁨months⁩ ago
Most likely, a Hetzner storage box is going to be so slow you will regret it. I would just bite the bullet and upgrade the storage on Contabo.

Storage in the cloud is expensive, there’s just no way around it.

source
- crony@lemmy.cronyakatsuki.xyz ⁨10⁩ ⁨months⁩ ago
  I will most likelly just do that in the end.
  
  Relly hope god will have mercy on me and allow me to move out soon to a bigger place.
  
  source
randombullet@programming.dev ⁨10⁩ ⁨months⁩ ago
You got a friend to host with?

I have an off site backup with a friend, but I’ve never tried streaming from them.

source
- crony@lemmy.cronyakatsuki.xyz ⁨10⁩ ⁨months⁩ ago
  I’m most likelly the only one among my friends who even own’s a smartphone/pc ( I live in Croatia in countryside where tech is seen as evil )
  
  source
  - tuff_wizard@aussie.zone ⁨10⁩ ⁨months⁩ ago
    I mean… they’re not totally wrong.
    
    source
    -> View More Comments
archy@lemmy.world ⁨10⁩ ⁨months⁩ ago
Not sure if this fits your needs but I bought a NAS and mounted it via NFS4 over tailscale to my cloud. Yes, it is slower, but I got 20TB in the cloud

source
- SeeJayEmm@lemmy.procrastinati.org ⁨10⁩ ⁨months⁩ ago
  This sounds like a stability horror show. Has that really worked out well for you?
  
  source
  - archy@lemmy.world ⁨10⁩ ⁨months⁩ ago
    Yes. When loading small images - there is no noticeable difference between local and NAS. When loading videos or large pics - there is about a 2 sec lag, then the video plays normally. I have a 500/500 Mb internet at home and on the VPS side I think it’s a few Gbps. I am consistently pulling minimum 200 Mbps between the two. I set a mount option ,nofail so that my OS boots up when NAS is down/unreachable, and my container also starts up fine with the NAS down, but won’t play its content obviously
    
    source
    -> View More Comments
Chobbes@lemmy.world ⁨10⁩ ⁨months⁩ ago
Running Jellyfin off of a VPS provider seems needlessly expensive. I guess server hardware has an upfront cost, but having real hardware to host it on at home will be far more cost effective long term, especially for storage.

source
ChojinDSL@discuss.tchncs.de ⁨10⁩ ⁨months⁩ ago
Do you have a NAS at home with enough storage? You could use wireguard to setup a vpn tunnel, then mount your NAS’s storage on your vps via nfs and using cachefilesd. If your upload speed is sufficient, this can work pretty well without too much waiting for a stream to start.

source