Figuring the best solution to get to a wireguard server behind commercial VPN

Submitted ⁨⁨1⁩ ⁨year⁩ ago⁩ by ⁨TheSyndZ@lemmy.dbzer0.com⁩ to ⁨selfhosted@lemmy.world⁩

Hi, A bit of a newb in the selfhosting world and i’m asking for any insights for the following issue :

The setup : A Openwrt router (GL-INET one) connected to the web via a Wireguard client line to a ProtonVPN server. The router has a Wireguard server running and AdGuard Home too. All the devices and server is connected to the router. A server is inside the LAN with some services (home assistant, paperless, etc.)

The goal : Trying to connect my phone on my router with the Wireguard server. To later access the services on LAN like home assistant or the router.

I’ve successfully uploaded the conf file to my phone but i cant manage to have the connection made to the router. The correct ISP IP is written into the conf files (tried DDNS glddns too without success). Of course if i write the VPN server IP it’s not working either but i guess that’s to be expected.

Maybe it’s the wrong solution ? Or do i have to get my hands in port forwarding on the vpn server level ? (i have no idea how to port forward in the vpn server though). Maybe there’s a simplier solution ?

Thanks for your advice :)

source

Comments

Sort:hotnew top

cytye@lemmy.wtf ⁨1⁩ ⁨year⁩ ago
To do this without port forwarding you could look at using tailscale (github.com/tailscale).

source
- TheSyndZ@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
  I’ll look into it, thanks
  
  source
vividspecter@lemm.ee ⁨1⁩ ⁨year⁩ ago
The commercial VPN client part shouldn’t affect your problem if I’m reading it correctly and you just want to access your LAN remotely. If you’re hosting the Wireguard server on the router, you’ll likely need a firewall rule for the port used by the wg server to allow inbound connections. And you need to configure AllowedIPs correctly on both server and client. And since you’re using OpenWRT, you might try out Policy-based Routing which gives you a lot of control over this and also has some instructions for various server and client configs which may be helpful.

Also, if your ISP uses a CG-NAT you won’t be able to do this, although some will disable it if asked.

source
- TheSyndZ@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
  Silly question but how do I know if I’m behind a cgnat ?
  
  source
  - vividspecter@lemm.ee ⁨1⁩ ⁨year⁩ ago
    If your public IP is in the 100.64.0.0/10 range, then you’re behind a CG-NAT.
    
    source
seshat@lemmy.963.pm ⁨1⁩ ⁨year⁩ ago
github.com/fatedier/frp 10 minutes reading 5 to setup the best tool for tunneling i could find. The frps on a vpn(the most cheap you can find) and frpc on your server at home

source
- TheSyndZ@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
  On a VPS you mean ? I’ll try thanks
  
  source
Decronym@lemmy.decronym.xyz ⁨1⁩ ⁨year⁩ ago
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

Fewer Letters More Letters

NAT Network Address Translation

VPN Virtual Private Network

VPS Virtual Private Server (opposed to shared hosting)

[Thread #127 for this sub, first seen 10th Sep 2023, 13:25] [FAQ] [Full list] [Contact] [Source code]

source

Fewer Letters	More Letters
NAT	Network Address Translation
VPN	Virtual Private Network
VPS	Virtual Private Server (opposed to shared hosting)