Maybe somebody here can point me in the right direction, I recently installed KAMP on my creality K1C using the creality helper script.
The P part is working great, purge line moves around as expected, but if I start the print from orca slicer “upload and print” It doesn’t seem to build a mesh at all, just touched the center of the plate and starts, if I start the print from the touchscreen it touches the corners, no matter how small the actual print is.
I activated label objects and exclude objects in orca, I even added the M117 command mentioned on the github. Anybody got any idea what I’m missing? The helper script wiki says it should be plug and play
DasKibby@lemmynsfw.com 1 week ago
Fascinating update, in playing around trying to fix the problem I accidentally broke my start gcode, all the newlines got mangled turning it essentially into one long line.
of course the print errored because I never set a first layer temp, but it bed leveled a small grid in the middle KAMP worked!
M117 M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
So something in this start code is making the KAMP mesh not work, I’m going to try not calling START_PRINT and see what happens… in a few hours when this print is done