WhoDunnit (Bally, 1995) developed an issue where the under the playfield slot machine's leftmost reel started to stutter and eventually completely die about after 10 minutes since power on.
From a technical side this is pretty much like any modern slot machine, which probably stems from the fact that Williams was also in slot machine business at the time. The reel is driven with a stepper motor and it has an opto switch to indicate home position. It calculates all the symbol positions by steps from that.
Each reel has a dedicated stepper driver board, which again is driven by the game software over a solenoid output. We can easily measure that it's not the drive transistor on the game's main driver board, so it's either wiring, stepper board or the motor itself.
I swap the center and left reel's motor output and opto switch connectors around to see if the problem moves to the next motor. It does not, the left one fails with known good board. I power the machine down and feel there's strong resistance in the motor. A touch test (bad idea in hindsight) reveals the motor is extremely hot and the bearings are probably dead now. Final verdict: replace the motor.
With the WhoDunnit's slot reel motor being my main suspect, I pull the whole slot machine assembly off the machine for closer look.
As it's on my desk, it's very clear just how hosed the old motor is. Without power, the steppers here should spin freely. This bad one barely moves and feels all crunchy inside. Most likely its bearings are FUBAR.
So here's a sped of version of the half an hour it took to replace whole thing. The slot machine assembly has 3 identical reel sub-assemblies in it. They come off with four screws, after which the reel has to be separated from the motor and finally the motor from the support bracket.
As this is just a generic stepper motor, I need to make a connector that fits the pin's stepper driver board. Fortunately that's just 4x 0.156" Molex KK pins and then vacating the old housing and stuffing these new ones in.
The reel test shows the new motor running as expected with no extra noises or other apparent issues. As I return to the attraction mode, the machine does a self-test on the reels, homing stopping them at bar-multiball-clue. For the owners of this game it's an easy way to verify it works.
Diagnosing and fixing WhoDunnit's failed slot machine reel
Submitted 3 weeks ago by
apz@video.apz.fi to apzpins@video.apz.fi
https://video.apz.fi/w/a6oc9XNv5fNbTzqw39HDhB