Comment on Unifi AP behind an extra switch: 2.4Ghz network stops working after ~30 minutes
fhqwgads@possumpat.io 3 months ago
Do you have a continuously running unifi controller or is it only running when you do the config? Does it do the same thing with the controller opposite to how it is now (ie if you aren’t running it does it do it when you leave the controller on)?
sylverstream@lemmy.nz 3 months ago
It’s a standalone AP. No controller. Two different SSIDs.
I’ve had it running now for 2 hours and of course now it works. The only change since last time is that I’ve reset the AP and did a firmware upgrade. Perhaps that fixed it…
fhqwgads@possumpat.io 3 months ago
Which model is it? As far as I’m aware all the Unifi APs need the controller for config. It doesn’t need to stay running unless you want a couple features for large deployments but you do need to run it to set things up initially. The Air Max / uisp lines are the ones with web based config.
sylverstream@lemmy.nz 3 months ago
AC Lite. It doesn’t need controller, it’s standalone. I configure it via the mobile app.
fhqwgads@possumpat.io 3 months ago
Ah, ok. The Unifi stuff is a bit weird like that. I recommend installing the controller on a computer if you continue to have issues. You don’t have to run it all the time, just use it for config and then turning it off is fine. It’ll give you way more information and control over exactly how the AP is set up.