Comment

Comment on Ender 3 having issues with text

<- View Parent

kboy101222@sh.itjust.works ⁨3⁩ ⁨months⁩ ago

So despite having this printer for a while, I’m unsure of what a few things you’ve asked.

First, the stuff I know how to answer:

afaik, it’s regular PLA. I bought it second hand but still fully sealed in the vacuum bag, so I’m not 1000% sure, but it only says PLA.
I unclogged the nozzle within the last couple of weeks with a cold pull. It was having issues with text before and after the unclogging.
The width seems unlikely. This problem has persisted through 2 filament brands. Unfortunately I don’t have calipers to test that with at the moment.
The settings I used for the bigger bottlecap (the one split into 2 pieces) were the default "0.08 mm SUPERDETAIL (0.4mm Nozzle) @ CREALITY found on PrusaSlicer. The bottom left cap used a semi-custom version of the same profile where I knocked the speed down to half. Figured it might have been too slow since the text came out way worse than the bottom right, which was printed on the “0.12 mm DETAIL” preset. If you don’t have access to PrusaSlicer, I’d be happy to copy over some of the settings.
Looking through PrusaSlicer, I don’t see any settings for flow speed other than Bridge Flow Speed, but I will get to googling and find it.

The main thing I don’t understand is calibrating e-steps. I’m unsure of what an e-step is.

Thanks for the quick (and detailed!) reply!

source

Sort:hotnew top

MrQuallzin@lemmy.world ⁨3⁩ ⁨months⁩ ago
For calibrating your printer, I always recommend teachingtechyt.github.io/calibration.html. Everything is step-by-step and helps teach you about the calibrations and what different settings do. I agree with the other commenter that you’re underextruding, based on your layers not filling in. Getting your E-steps calibrated is extremely important, then I’d start working on flow rates (which can change between rolls and brands)

source
Shdwdrgn@mander.xyz ⁨3⁩ ⁨months⁩ ago
You’ll want to google the exact steps for calibrating e-steps, but basically this is the setting that determines how many steps of the stepper motor are required to move the filament a given amount. You disconnect the bowden tube from the head, then push the filament through so a bit is exposed past the end of the tubing and mark exactly where the end of the tubing is on the filament. Now from your slicer you instruct the printer to extrude 100mm of filament, and very carefully measure how much actually comes out. If you have exactly 100mm then great, but typically you will find it off by a few mm (and in your case it’s probably less than 100mm). It doesn’t take much to cause a big problem. Any how-to page will show how you can read the current setting (I think it’s 92 steps by default), and there are formulas which will calculate the new number you need to change that to.

So the idea here is that if the slicer thinks it should be outputting 100mm of filament, but it only pushes 95mm instead, you won’t have enough filament to fill in the gaps. Setting the correct value on the printer will fix this, and then you can adjust more minor issues by changing the flow rate in the slicer. You will also note that different types or brands of filament extrude at slightly different rates, which is why your slicer may allow different profiles for the filament itself.

I’m not familiar with PrusaSlicer. Cura has always worked well for me, it’s free, and it provides quite a lot of options for fine-tuning your prints. If you find that Prusa doesn’t let you adjust the filament rate, give Cura a try.

source