Comment on PETG damaged plate
user_6282638282@sopuli.xyz 3 days agoYes it’s definitely “etched” into the textured surface of the plate, although I don’t have a microscope to confirm, it feels that way. There’s no edge to catch with a scraping tool. And you can see in the photo from my previous reply that material is embedded in the bottom of the print!
It’s possible it made god-awful noises, because it’s in a shop and because this was a “repeat print” I just set it and walked away.
floquant@lemmy.dbzer0.com 3 days ago
Then I would suggest checking if you have filament g-code set in your slicer, I guess it’s possible the z-stop was calibrated with a z-offset applied, and when it was removed by setting PLA the nozzle tried to go slightly below 0. What firmware are you running?
user_6282638282@sopuli.xyz 3 days ago
It’s just the default firmware, V1.0.6.
Z-offset is set at 0 in all the gcode I’ve checked so I think it’s the printer.