Comment on DIY PCB making, milling or chemical etching?
Rolive@discuss.tchncs.de 1 week agoHmm. I’ve gotten to the point where I used my CNC for the chemical etching process as well. Instead of fumbling with toner transfer I use spraypaint and a laser engraver as etch resist. It is way more reliable.
As for ferric chloride, indeed you cannot see your circuit board but it is possible to store this for long. Solutions like HCl + H2O2 don’t last very long and I only do PCB making sporadically.
RedBauble@sh.itjust.works 1 week ago
This is basically what I do at the FabLab, I was about to post a comment when I saw yours. If you’re interested, I wrote a blog post on the procedure, what I need to update it for double sided PCBs emamaker.com/projects/…/pcb-laser-engraver.html
Rolive@discuss.tchncs.de 1 week ago
Interesting read! I’ve seen a video on youtube where someone used white UV curing resin as the first layer and also as etch resist. It can be cleaned with IPA and you just leave it on after etching.
Afterwards a green layer of UV curing resin is applied and the laser is used to burn away only the green material so that silkscreen text becomes visible. I haven’t tried it myself but it looks like a promising process.
RedBauble@sh.itjust.works 1 week ago
Yeah I know about that kind of approaches but I haven’t been able to test them, the resins don’t look cheap and I don’t make pcbs often enough to justify the cost. But I have tried engraving FR4 to get silkscreens on single sided boards. Decent results, but the smell is awful