Comment on Resistor Identification
solidheron@sh.itjust.works 1 month ago
You could test the other resistors to see if they match their ratings. The high value could suggest that it’s burnt to a near open circuit.
Comment on Resistor Identification
solidheron@sh.itjust.works 1 month ago
You could test the other resistors to see if they match their ratings. The high value could suggest that it’s burnt to a near open circuit.
jeinzi@discuss.tchncs.de 1 month ago
With all other resistors on the board, my measurements match the color code. This one is the only exception :/
solidheron@sh.itjust.works 1 month ago
Shit I flip the values of the ohm meter and color value.
Well my second option is to replace the resister with a new color code matching resistor and see if it works.
A high value resistor should work