Comment

Comment on How stable is a metallic print

ForgotAboutDre@lemmy.world ⁨4⁩ ⁨months⁩ ago

Get a metal bar, bend it like the sketch I did and drill the corresponding holes. You could 3d print a rectangular spacer to stop the pin holding part from compressing in use.

source

Sort:hotnew top

DrunkenPirate@feddit.de ⁨3⁩ ⁨months⁩ ago
Hi guys, thx for all your help. My project is finally successful. Shower hinge repaired - entire shower cabinet usable now. Let’s give you a short feedback:

I‘ve chosen PCBway as it was the cheapest with 90€ for stainless steel, laser sintering.

Other both providers were around 300€ up to 1000€ ( this one in chrome though)

The production & delivery time was quite long with 2-3 weeks from China. But I‘m not in a hurry.

I did two plastic prototypes first and discovered always a few new details I didn’t recognize first.

The metallic print is stainless steel (hope better than Tesla quality) and it‘s fully printed - not the walls only.

At all it costs 130€ for the print, oil, silicone sealant and some other things. Saved me approx 2-4000€ for a new shower cabinet as spare parts were out of production. A picture in comment below.
source
- DrunkenPirate@feddit.de ⁨3⁩ ⁨months⁩ ago
  source