Comment on How stable is a metallic print

nezbyte@lemmy.world ⁨8⁩ ⁨months⁩ ago

• DrunkenPirate@feddit.de ⁨8⁩ ⁨months⁩ ago

  proper hinge

  source

  • ForgotAboutDre@lemmy.world ⁨8⁩ ⁨months⁩ ago

    Image

    Get a metal bar, bend it like the sketch I did and drill the corresponding holes. You could 3d print a rectangular spacer to stop the pin holding part from compressing in use.

    source

    • DrunkenPirate@feddit.de ⁨8⁩ ⁨months⁩ ago

      Hi guys, thx for all your help. My project is finally successful. Shower hinge repaired - entire shower cabinet usable now. Let’s give you a short feedback:

      • I‘ve chosen PCBway as it was the cheapest with 90€ for stainless steel, laser sintering.
      • Other both providers were around 300€ up to 1000€ ( this one in chrome though)
      • The production & delivery time was quite long with 2-3 weeks from China. But I‘m not in a hurry.
      • I did two plastic prototypes first and discovered always a few new details I didn’t recognize first.
      • The metallic print is stainless steel (hope better than Tesla quality) and it‘s fully printed - not the walls only.

      At all it costs 130€ for the print, oil, silicone sealant and some other things. Saved me approx 2-4000€ for a new shower cabinet as spare parts were out of production. A picture in comment below.

      source

      • DrunkenPirate@feddit.de ⁨8⁩ ⁨months⁩ ago

        source
• DrunkenPirate@feddit.de ⁨8⁩ ⁨months⁩ ago

  broken hinge

  source