Comment on Setting Up OPNsense on Proxmox: Doubts regarding NIC setup

• HiTekRedNek@lemmy.world ⁨5⁩ ⁨hours⁩ ago

  Mine, a Brocade ICX6450, is solid as a rock using a hacked license to enable 10Gbe on all 4 SFP+ ports.

  They’re loud, as the firmware is a little buggy, and doesn’t ever actually set the fan speed to low after booting, regardless of the temps.

  But there’s a few tricks to that. There’s a command you can run to force the speed to low, and I just have that sent via SSH when my raspi5 boots. Because it needs to be sent when the switch powers on. So if I lose power for an extended time, it’ll still be reset to low after it all comes back.

  original

  • Cyber@feddit.uk ⁨5⁩ ⁨hours⁩ ago

    Nice. Thanks for the info on the fans

    I guess you’re running the Fohdeesha firmware, I’ll have to look into this a little more…

    Thanks

    original