Comment on €45,000 for a heat pump installation in Germany -- really?
activistPnk@slrpnk.net 4 months agoAnd btw: you don’t need to reach 60°C with a heat pump. That would be pretty inefficient.
Thanks for the feedback.
My boiler gives me control of the temp of the water running through the radiators which is independent of the room air temp thermostat. I set the water to ~55°C which seems to reasonably get the air to 17° without running continuously. I mentioned 60° because I figured that temp would enable someone to heat their room up quickly. I wonder why you say a heat pump would not need 60°. I would think the radiators need to reach a high temp like ~50—60° regardless of the kind of furnace. Maybe I’m doing something inefficient. Should I use a lower temp? I could lower the water temp but then there would be a point where the furnace has to run continuously which i would think is inefficient.
SomeoneSomewhere@lemmy.nz 4 months ago
Running continuously is usually the ideal point. For heat pumps, it definitely is as the efficiency is highest with the lowest split between indoor and outdoor temps.
The issue is that if you suddenly want more heat, you first have to raise the water loop temperature before that can start pushing more heat into the house.
Systems are usually designed to keep up at perhaps 22-24C even on the worst days of winter; maintaining 17C is a lower target that can be met with less capacity and cooler radiators.