Comment on Setting up your own VPN

goodhunter@lemm.ee ⁨1⁩ ⁨year⁩ ago

• randombullet@lemmy.world ⁨1⁩ ⁨year⁩ ago

  This is the exact script I use to install tailscale on my VPN server

  Installing Tailscale

   curl -fsSL https://tailscale.com/install.sh | sh 
  

  Enable IP forwarding

   echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf 
   echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf 
   sudo sysctl -p /etc/sysctl.conf 
  

  Advertise subenets and exit node

   tailscale up --advertise-exit-node --advertise-routes=192.168.0.0/24,192.168.2.0/28,192.168.5.0/24,192.168.10.0/24
  

  source

  • goodhunter@lemm.ee ⁨1⁩ ⁨year⁩ ago

    Thank you for message, i appreciate the effort.

    Where I struggle is the part where i need to expose my subnet within Tailscale. I don’t have any machineip:port delegated to the services anymore.

    I got a domain name through CF, and have traefik generate unique url links as *service.mydomain.com that routes it to the specific service running in docker on my localmachine. Calling that service url only works within the local network.

    In my docker compose set up, I removed all the ports as I dont access the services via ip:port. I hope this makes sense to you.

    So it seems I need to configure Tailscale in such a way I can tunnel to my home network and then make the service.mydomain.com call. And that is where it got too complicated for me right now.

    source

    • appel@whiskers.bim.boats ⁨1⁩ ⁨year⁩ ago

      You can run tailscale client on the host, not in a container. Then for the domain names, create a DNS record either in the public DNS (or I think you can do it in the internal tailscale DNS) that points a wildcard for your subdomains to the IP of the container host within the tailnet. Do “tailscale --status” on any device joined to the tailnet to see the IP addresses inside the tailnet. Then all of the devices will make their DNS request to either your upstream DNS or the internal one, they get the response back that they need to send their http request to the container host within the tailnet, it sends on the default 80 or 443 ports for http and https respectively, and then your reverse proxy handles the rest.

      source
• ashok36@lemmy.world ⁨1⁩ ⁨year⁩ ago

  I’ve been using it for maybe a year now and it’s been rock solid. Highly recommended.

  source