Comment

7Sea_Sailor@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago

I have very recently acquired 4x18TB Seagate Exos drives for a fresh server. I parked them in an old case I had lying around where i was barely able to secure them all with screws, and cooling was especially problematic. Noise was horrible. standby noise was already audbile in the entire room. and when writing data while parity calculations were running, you could hear it in the entire apartment. The noise travelled through the wooden floor into every other room.

I have now moved the server and the drives into the fractal define 7 case. the drives rest on specially made rubber bearings that came with the case. the sides are noise isolated. the system is running with 6 fans total, 3 of which are 120mm corsair fans repurposed, and 3 are 140mm from the define 7. the server is now close to noiseless. vibrations do not rattle the case as with the old one. the rubber bearings isolate most of the vibration anyways. all that is left is a bit of head clacking, which gets isolated away from the case sides.

long story short: the drives are only half the story. you need a proper enclosure that is noise isolated. the define 7 is comparatively huge, but it gives you immense room to grow and was truly a godsent regarding noise.

source

Sort:hotnew top

AtariDump@lemmy.world ⁨1⁩ ⁨year⁩ ago

I have very recently acquired 4x18TB Seagate…

There’s your first problem.

source
- 7Sea_Sailor@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
  I know, people like to call them noisy. I’m sure they are, but I have no point of reference. I’ve never interacted with 18TB drives before. And as I’ve written in the comment, with the Define 7 I’m having absolutely zero noise issues. The maximum noise I am able to get out of the drives is when writing during parity calculations, and in the Define 7 this scenario causes near zero audible noise. I am wonderfully happy with what I have.
  
  source
  - AtariDump@lemmy.world ⁨1⁩ ⁨year⁩ ago
    Not noise; their failure rate was HORRIBLE for a while, then there was the firmware debacle that bricked drives, and then there was when they dropped their warranty from 5 years to 3 years to 1 year……
    
    source
GetAwayWithThis@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
Thanks for the insights on the case and drives!

I have an old Silverstone case with about 6 of the old style 3,5" drive mounts and 3x5,25" bay. Originally I had a Samsung 1TB drive in it (which is still kicking around somehow pulling torrent drive duty) I remember it being louder in that case then in my new one. So I’ll have to test it out. If i can get my hands on some rubber bearings and if they help any at all.

I am not planning to go that big on storage for now tho. It sounds like serious work. I am doing this so I can be more comfortable. Aside from updates, I want to dial it in once and forget it unless I need to touch it.

source
- 7Sea_Sailor@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago
  Since you’re going to go with 4TB drives, they may already make less noise just based on that. At these lower capacities (would have been an insane thing to call 4TB drives a couple years ago lol) they’re built differently.
  
  If you’re not gonna use a “proper sound isolated case”, let me share these two ressources for custom sound dampening cases: silentpcreview.com/forums/viewtopic.php?t=70364
  silentpcreview.com/forums/viewtopic.php?f=7&t…
  
  Both taught me a handful of things about what I can do beyond buying an isolated case to reduce noise output. Maybe they will be of help to you too. Best of luck!
  
  source