Comment

Comment on How to setup my own home server & make it available to anyone?

There’s also Armbian (www.armbian.com/rpi4b/) but only Ubuntu based right now.

There multiple issues with mainline Debian on those boards and while I would love to run it, it doesn’t cut it. Generic images might underperform in your board, the GPIO and other low level components will, most likely, not work and you might burn your storage as logging and other I/O intensive operations aren’t tweaked for SD cards. Another annoying thing is that the Debian image will

Armbian could be a great solution however there has been not much interest in the RPi board most likely due to what I pointed before.

source

Sort:hotnew top

bustrpoindextr@lemmy.world ⁨8⁩ ⁨months⁩ ago
Also WRT telemetry: forums.raspberrypi.com/viewtopic.php?t=341514

The only telemetry is pertaining to what the imager is burning to the card. So if you don’t use the imager there’s no telemetry, if you use the imager but disable telemetry, there’s no telemetry, if you don’t disable it, it just sends back what you’re installing.

source
- TCB13@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Here the problem: they’re forcing people into the Raspberry Pi Imager with shady tactics. Without it you won’t be able login via network out of the box and by default it enables telemetry. This isn’t okay.
  
  source
  - bustrpoindextr@lemmy.world ⁨8⁩ ⁨months⁩ ago
    I’ve already spoken about the “telemetry” but here’s your ssh login. Literally all the installer is doing is adding a blank file.
    
    phoenixnap.com/kb/enable-ssh-raspberry-pi#:~:text….
    
    Then if you don’t want to do that every time, just create an image for it. That’s your new image to flash onto the SD cards.
    
    There’s nothing stopping you from not using the imager. dd works just fine. There’s no telemetry on the OS itself, so here’s how you personally get what you’re looking for.
    
    dd the base image to a card
    
    verify the card and image are working properly by booting on a pi
    
    turn off pi
    
    insert card into computer and create file in boot directory
    
    create a new bootable backup image from the card, and save that on the computer it’s plugged into, cloud or local backup storage you’re running, whatever
    
    dd that image as the base image for all new cards.
    
    source
    TCB13@lemmy.world ⁨8⁩ ⁨months⁩ ago
    
    but here’s your ssh login. Literally all the installer is doing is adding a blank file.
    
    Yes and why are they forcing us to go through hoops / non standard BS instead of doing it like any other SBC and just enabled by default. Armbian does it and once you login you’re required to change the password for security.
    
    I remember before the imager the RPi also had SSH enabled by default. Don’t sugar coat it around security, this is bullshit to force people into their imager.
    
    source
    -> View More Comments