Comment on Help - Layer delamination
nath@lemm.ee 11 months agoThat’s a good point - I remember calibrating the extrusion multiplier for 0.1mm but not for 0.2mm, never thought that larger layer sizes would need independent calibrations!
Comment on Help - Layer delamination
nath@lemm.ee 11 months agoThat’s a good point - I remember calibrating the extrusion multiplier for 0.1mm but not for 0.2mm, never thought that larger layer sizes would need independent calibrations!
empireOfLove@lemmy.one 11 months ago
Yeah, extruder scaling is not perfectly linear, as you scale it faster the plastic slips more on the drive rolls, the heat input increase means the melt rate will not be perfect, and you have to fight the viscosity of liquid plastic.
nath@lemm.ee 11 months ago
Brilliant, thanks for the insight! Hopefully orcaslicer has a multiplier for each layer height - not just per filament
empireOfLove@lemmy.one 11 months ago
I’d assume it does. If it doesn’t you can always duplicate your filaments and just rename them to each layer height they’re calibrated for.