I’m not going to say it was smooth sailing but I think I’m through the rough waters. This past day I’ve been printing basically non-stop and every print has been pretty much flawless.
The days before this though I had:
Diagnose z-axis movement issues.
Accidentally printed PETG onto the smooth bed plate. (I knew this was bad but I just assumed it was bad adhesion, I didn’t realize the problem was the opposite LOL)
Broke the belt tension adjustment piece and had to drill holes into it to remove it and replace it with a piece I printed with PETG.
Diagnose a “ghost clog” where I took off the nozzle, found no clog, took apart the nextruder and found nothing and realized at the end it was bad filament.
I wasn’t even able to put the printer together without reading the comments pointing to waaay too many flaws in the instructions.
Well, I learned that with the smooth plate the hard way too.
Don’t get me started on that one. The nut in the ajustmend-thingy broke loose on mine, after I had to tentioned the belts way too often, cause the Axis bent. I had to saw the screw of at the front to get it out. Whole process took me about a month.
I put the spacer hooks of the heatbed on the wrong way, and changing them when the printer is essembled. Well, a friend who repairs washing mashines for a living helped me out.
The ghost clog is interesting too. I’m on my third nozzle now, trying to clean number two and three. Seems like a clog on the seperation of filament in front of the vulcano-split (high flow) and by the love of god I can’t seem to het them unclogged. I soked them in cemecals to break the plastic-chains. The design is so annoying to get to in any way, cause at least as a amateur, you only realize the clog when its too late. (and I know that that might break some cotings of the hardened steel nozzle, but a this point, I tried anything else)
So yea, I hope you’re printing adventure is smoother than mine.
idunnololz@lemmy.world 2 months ago
I’m not going to say it was smooth sailing but I think I’m through the rough waters. This past day I’ve been printing basically non-stop and every print has been pretty much flawless.
The days before this though I had:
Foexle@feddit.org 2 months ago
idunnololz@lemmy.world 2 months ago
Oof that sounds rough. I hope it’s all fine now.