Comment on Should I go with a prebuilt or custom built NAS to get into self hosting?
CCatMan@lemmy.one 1 year ago
I ended up going with a synology Nas as i didn’t need high performance CPU and wanted a turn key solution. For what you get hardware wise, its low value, but if you factor in software and support, it works out to OK value.
You mentioned your parents will be using this. What services are you hoping to host? Outside network access is another rabbit hole.
Check the hardware requirements of the services you plan the host, but from what ir sounds like, you would likely be better served with decent pc 8th gen Intel with the storage in a 4 bay NAS or internal to the PC.
I suggested 8th gen Intel as a min for video transcoding (if needed)
skybox@lemm.ee 1 year ago
My parents won’t necessarily be using the NAS, I’d just be using some kind of system (maybe even just a raspi) as a remote backup solution with a wireguard tunnel to my local NAS, but if a drive fails, I’d be about 700 miles away to manage it.
If it was a perfect world, I’d like to just ship a new drive to my parents and tell them to unplug the failing one and plug in the new one, then manage the rest automatically/myself remotely, but I assume that’s a pipe dream.
howlingecko@sh.itjust.works 1 year ago
Built a NAS over 5 years ago. It runs UnRaid and configured with dual parity. If a drive were to go bad: shutdown the NAS, slide the drive out, slide the new drive in, power back up and the rest could be done remotely (via your WireGuard tunnel).
Unraid is capable of hosting your VMs and/or docker containers as well. I have Syncthing running in a container with a remote machine (also running Syncthing) and they sync backups.
One of the main perks of UnRaid is that you can mix and match drive sizes. You just have to make sure that your largest capacity drive(s) are your parity drive(s).