Comment on Guide recommendation for absolute newbies?
neidu3@sh.itjust.works 1 week agoJust a couple of notes: Your material of choice isn’t a final one. Most printers can print most “normal” filaments, such as PLA, ABS, PETG, ASA, etc, and if you start with one, moving to another isn’t a big deal. The only caveats here are:
- Some materials are harder to print than others. PLA is generally considered the easiest, and personally I find PETG pretty easy too. ABS is a really durable material, but can be a PITA to print.
- Some matererials are considered abrasive, so you’ll need a hardened nozzle.
- Some materials, such as ASA and ABS, cause toxic fumes during printing. Proper ventilation is important for those.
For outdoor use, the main factors are temperature tolerance and UV resistance. I’d advise against PLA for outdoor use. PETG is slightly better in these regards, and I am currently testing how well PETG handles a Scandinavian outdoor climate, and things look promising.
bowreality@lemmy.ca 1 week ago
I would love to hear about PETG’s performance during a Scandinavian winter. I am on Canada and soil sensors I would pull over winter but some other stuff might be interesting to leave outside. For ventilation I could either use it outdoors (summer) or in the garage in winter unless it needs room temp to print. That would be an issue in winter.