I did #2 and it works perfectly. I have an IoT VLAN and my Brother printer/scanner is on it. I pivoted to the Ubiquiti/Unifi network infrastructure several years ago due to mostly seemless integration with the routers/switches/APs. But have used OpenWRT in the past (but didn’t set up VLANs then). Not sure the steps and if it requires manual firewall rules for the VLAN in OpenWRT.

In case there identical/similar options to Unifi, however, I’ll just mention it’s pretty simple. Create the VLAN (new subnet vs the default network, e.g. 10.0.0.0/24 vs 10.1.0.0/24), deselect the “allow internet access” option, and make sure to select “network isolation” option (which blocks it from speaking to other VLANs/subnets). That’s it. (For conveniences, I also created another Wifi network call “XYZ_IOT” and then connected the printer to it. The network is fixed to that new IoT VLAN).

Technically, those options are effectively convenient shortcuts for firewall rules that will get removed or created, accordingly, for that specific VLAN.

Takes longer when you’re uncomfortable or struggling through it, but the complete setup time took maybe 15-20mins. If OpenWRT doesn’t have those convenience shortcuts, might take a bit longer to search for example firewall rule configs online and then make them.