Comment on Networking Help
1111@lemmy.world 1 year agoSure thing! I’ll answer everything as best I can.
The machine is a single laptop running Mint. All the docker containers are being served from this machine, and during this testing I was trying to access them all from that same machine. I observed the containers were up and running properly with docker stats cmd and I saw they were accessible over the original IP when using the ISP WiFi.
The access points are TP Link Deco, it’s 3 units, the first of which is connected via ethernet to my ISP provided router (Virgin Media Superhub). I believe they are WiFi meshing. I can’t tell too much more about how they work ‘under the hood’ as the setup was very… ‘consumer friendly’ and didn’t cover much technical detail
When I connect to this network and run ifconfig it looks like the IP changes in the last few digits. I thought if I used that IP with appropriate ports I might be able to view my servers, but that was not the case.
med@sh.itjust.works 1 year ago
If you’re starting the mediabox setup on the isp network, it’s doing local natting with iptables, based on the IP that it resolves from the hostname. Probably would need to shut down and re-up to walk between the deco’s and the isp wifi domains.
I agree with the other comments, looks like you might be in a double NAT scenario - fortunately for you, I think I know how to fix it, seeing as we’re both running deco’s!
You want to go into the smartphone app, go to ‘More’ at the bottom right, (as opposed to ‘Network’), Advanced > Operation Mode > Access point.
1111@lemmy.world 1 year ago
Hi!
The hostname thing is weird. I was able to navigate to the hostname in my browser which successfully showed the mediabox landing page (I believe this is ‘Homer’), but all the links on there were pointing to the machine IP. If I changed the address to be hostname:32400, maybe it would have worked, but I didn’t try that. I guess homer should route to a machine IP not a localhost so as when you land there from another device it properly routes to the machine which can serve the apps.
Aside: Do you (or anyone reading!) know how you do that thing where you alias your machine IP to an arbitrary name? I’m sure I did it once upon a time with ‘bonjour’(?), but I don’t recall any more than that.
Anyway, turning the deco’s onto access point mode solved everything :)
Regarding mediabox - there seems to be a few good projects like this, they are actually incredible and super helpful for a learning perspective. I started with YAMS which actually has miles better documentation and is super helpful for setting up the services. Mediabox seems to assume you know a bit more about how the *arrs work. It sets up the containers and the folder structures really nicely, but for a novice like myself it took some time to get all the applications configured.
It’s been a fun project though!
med@sh.itjust.works 1 year ago
Sweet! Yeah, I’m guessing that the iptables-mangle and landing page link setup relies on getting that IP before populating the page, and that it’s not reactive to changing IP address. It might have worked if you were disconnecting networking all together, and joining a different network, but with the wonky way wifi roaming actually works, the mediabox management scripts probably never noticed there was a need to re-trigger.
You’re looking for mdns! Depends on which distro you’re on. For apt based stuff like mint, look for mdns (used to be libnss-mdns on raspberry pies, guessing it’s the same for lint? It’ll install avahi zeroconf stuff if it’s not there already. Check the service is running, then ping $HOSTNAME.local - replace with whatever your host name is.