Failure to connect, still. Odd.
Comment on Error 1033 Cloudflare
3dcadmin@lemmy.relayeasy.com 1 month ago
Cloudflare won’t connect to a port number that high. Drop it down to say 2536 and you will be fine
lilcutie24@sh.itjust.works 1 month ago
VeganCheesecake@lemmy.blahaj.zone 1 month ago
I presume they mean pointing their cloudflare tunnel to direct lemmy.example.com to localhost/:[port], and I don’t think there’s any special rules about that port from cloudflares site.
I use tunnels and ports in about that range for all my sites, and don’t have any problems.
3dcadmin@lemmy.relayeasy.com 1 month ago
It depends… the OP is also using yunohost which can and does have some issues with higher port numbers, plus you also have to factor in if he is self hosting as I suspect, some routers also won’t properly forward higher port numbers either. Difficult to say but lowering the port number is one thing to try. Too many variables to really drill down and say what is happening
VeganCheesecake@lemmy.blahaj.zone 1 month ago
Yeah, I feel like we’re missing some info here.
I have to admit that I have no experience with yuno. Always seemed interesting, but not like something that fits into my work flow.
If they’re self-hosting at home (which I’m also doing for some services), I’d presume they’re probably running their stuff on a single machine, so I’m not sure where their router would come Into it. The data the cloudflare tunnel process receives should look the same to the router no matter the port it is ultimately sent to, and when it is sent to an address internal to the machine, shouldn’t pass through the router again.
3dcadmin@lemmy.relayeasy.com 1 month ago
It should, and yes I used to think that. I’m in the UK and some routers just fail to work properly with higher port numbers, especially cheap routers from cheaper providers. Once you start getting above 8000 the traffic is limited thus me saying try a lower port number. Plus yunohost doesn’t really ask for a port number as you should add a domain first, then install the application (it uses docker btw) on that domain, then cloudflare to the domain. So the port number isn’t required. I’m guessing, but can’t be sure, that this is the real issue. yunohost adds a self signed cert and configures the firewall etc. so if you don’t do it right using a cloudflare tunnel it just doesn’t work. I’m guessing the OP hasn’t done it like this, and then it will never work - believe me I’ve tried. yunohost also adds fail2ban, firewall inside yunohost and various other ways to protect what is served