Update 2: I was able to get the PTFE tube out of the side sensor but I tore the collet out as well and it went flying. Against all odds I was able to find it, but now I have to see if I can reinsert it.
Comment on Clearing broken filament from Prusa core one+
trailee@sh.itjust.works 3 weeks ago
You can look through the assembly manual for the kit version, and find that the black 3d printed elbow that attaches the Bowden tube to the top of the hot end just slides right on. So you might need to undo a tie or two but it should be easy to pop that off and get the filament out.
earlier_riser@lemmy.world 3 weeks ago
earlier_riser@lemmy.world 3 weeks ago
update: It looks like I need to detach the tube from the front sensor and I can’t do that without removing the side panel which is riveted to the frame.
trailee@sh.itjust.works 3 weeks ago
I’m not sure exactly what you’re saying but you certainly don’t need to drill out rivets to get to it.
I assume you’re talking about the sensor at the start of the tube. Assembly of that one is step 7.19 through 7.21, and attaching the body panel on that side is step 7.40 (maybe look back as early as 7.35 for the prep work).
You might also try talking to Prusa support.
earlier_riser@lemmy.world 3 weeks ago
Thanks. Will take a look after I’ve had a full night’s sleep.