I don’t think multi diameter slicing is released just yet
Comment on Update on the ["crushed letters" issue](https://lemmy.sdf.org/post/36243859)
ExtremeDullard@lemmy.sdf.org 2 weeks agoYou’re correct. A 0.2mm nozzle would certainly improve things. But it would also make printing those tabs unbearably long.
I wish my company had bought a 5-head Prusa XL: then I could have loaded black PLA and white PLA in two heads with 0.2mm nozzles, and a separate feed of black PLA in a third head with a 0.4mm nozzle for the rest of the parts that don’t need to look nice. But… ours only has two heads and it’s 0.4mm on both, because all the other parts we prints just don’t need finer details.
m4xie@lemmy.ca 1 week ago
CmdrShepard49@sh.itjust.works 2 weeks ago
Try reducing the line width especially for the initial layer. I googled about Arachne line generator and it looks like it’s the default wall generator in PrusaSlicer as of v2.5. I can’t tell if you’re using a textured build plate or not but you could also try swapping to a smooth one (or vice versa) and seeing if that makes any difference. You don’t even need to print the whole tab for testing, just the first few layers to see if you’re on the right track.
You could also try using a 0.2mm nozzle just for the white filament and seeing if that helps.
Shayeta@feddit.org 2 weeks ago
Longer than its been taking to solve this issue without it? Just bite the bullet and get the results you want.