Custom. It started life as a tronxy x5sa-400 but I think only 2 steppers and the frame are original still. I changed the bed to a 16"^2^ *3/8 thick aluminum tool plate about 5 years ago. It always worked well for me. Unfortunately the silicone mat I used doesn’t seem to be made any more. I’m going to try one meant for a creality cr10 S4. I may have to re-machine the mounting holes for the thru holes on the mat tho.
_thebrain_@sh.itjust.works 1 month ago
Custom. It started life as a tronxy x5sa-400 but I think only 2 steppers and the frame are original still. I changed the bed to a 16"^2^ *3/8 thick aluminum tool plate about 5 years ago. It always worked well for me. Unfortunately the silicone mat I used doesn’t seem to be made any more. I’m going to try one meant for a creality cr10 S4. I may have to re-machine the mounting holes for the thru holes on the mat tho.
Kuinox@lemmy.world 1 month ago
Ah you too decided to torture this printer.
_thebrain_@sh.itjust.works 1 month ago
I have had it since probably 2018? It was one of the original x5sa kits. Honestly it has been a good platform to learn off of
Kuinox@lemmy.world 1 month ago
I’m starting to build a voron trident on it.
For now I stripped everything and only have the base frame.