Comment on YSK You don't need Teflon pans for nonstick
chonglibloodsport@lemmy.world 23 hours agoI have that same wok. You need a lot more oil for a flat bottom wok than a round bottom because the flat bottom doesn’t let the oil pool to the middle.
You absolutely can get nonstick eggs with a stainless steel frying pan and a small amount of oil but you need to actually practice heat control and cooking technique. It’s actually much easier with butter because the water in it will begin to fizz and you just need to wait for the fizzing to stop and the pan will be just about hot enough.
You still need to use the right heat setting which is specific to your stove and pan, so practice is needed but you can get a good feel for it by how quickly the butter melts. If it melts rapidly and gives off a lot of steam and begins browning then the pan is too hot (unless you want to do a crispy egg, but that should be done with oil instead of butter which has milk solids that burn and turn bitter).
pupbiru@aussie.zone 22 hours ago
slightly wet your fingers and flick little drops of water into the oil for the same “fizzy” test for regular oil… it’s not enough water to be problematic, but plenty enough to give you a light to heavy fizz to tell you how hot the pan is
chonglibloodsport@lemmy.world 21 hours ago
I have used the water drop trick occasionally. Usually I cook an egg at higher temperature though. I wait until the oil smokes and fry it to get a golden brown crispy bottom. My favourite egg to throw on a noodle or rice bowl.
endeavor@sopuli.xyz 17 hours ago
I wait for water beads to dance arund on metal and then turn down the heat and wait a few mins. I put on oil and roll it around to ensure every pore is hit and then slap the egg on. That way you can use lower temperature.
Ive found when oil shimmers it is hot enough to not stick, but its not reliable.
chonglibloodsport@lemmy.world 14 hours ago
Generally my crispy egg method causes the egg to stick but then it releases!