Comment on UPS input load
SteveTech@programming.dev 2 weeks ago
It’s weird to do this daily, but it’s possible that the UPS is doing a self test, which would drain the battery a little and the load is from charging it back up.
Comment on UPS input load
SteveTech@programming.dev 2 weeks ago
It’s weird to do this daily, but it’s possible that the UPS is doing a self test, which would drain the battery a little and the load is from charging it back up.
dieTasse@feddit.org 2 weeks ago
Same as above. The TP link that measure the power is plugged into the UPS not the other way around. The UPS is directly in the wall plug. So even if the UPS drawn 100 Watts it shouldn’t show on the TP Link.
SteveTech@programming.dev 2 weeks ago
Ahh sorry, I thought you meant you plugged it into the input side. If that’s the case then are you running anything that measures CPU usage? I run the TIG stack, it might be able to give you some hits. Also back to my original point which is already unlikely, if it’s a modified sinewave UPS, it can confuse some measuring devices while it’s on battery.