Comment on Ender 3 V2 damage?
KingRandomGuy@lemmy.world 1 week agoYeah, I agree. In the photo I didn’t see an enclosure so I said PETG is fine for this application. With an enclosure you’d really want to use ABS/ASA, though PETG could work in a pinch.
I also agree that an enclosure (combined with a filter) is a good idea. I think people tend to undersell the potential dangers from 3D printing, especially for people with animals in the home.
beastlykings@sh.itjust.works 1 week ago
What filter would you use? I’ve never played with abs because I didn’t want to have to vent an enclosure outside, especially in the winter. But if it could all stay inside that’d be great.
I have a cat. Cat tax: Image
KingRandomGuy@lemmy.world 1 week ago
Cute cat! Nevermore and Bentobox are two super popular ones.
Since you’re running an E3 V2, first make sure you’ve replaced the hotend with an all-metal design. The stock hotend has the PTFE tube routed all the way into the hotend, which is fine for low temp materials like PLA, but can result in off-gassing at higher temperatures such as those used by ASA and some variants of PETG. The PTFE particles are almost certainly not good to breathe in during the long term, and can even be deadly to certain animals such as birds at small quantities.
beastlykings@sh.itjust.works 1 week ago
Thanks for the information!