Krackalot@discuss.tchncs.de 3 weeks ago
Mind showing some build pics if you got them? I’m probably going to make one out of 1/4" plywood I have left over. Some build tricks would really help.
Krackalot@discuss.tchncs.de 3 weeks ago
Mind showing some build pics if you got them? I’m probably going to make one out of 1/4" plywood I have left over. Some build tricks would really help.
Marafon@sh.itjust.works 3 weeks ago
I don’t have any build pics for you unfortunately. I would really recommend using at least 1/2 inch plywood for this kind of build though. I went 3/4 because I was worried 1/2 inch would vibrate too much. The enclosure needs to have more mass than the printer to reduce the risk of vibrations effecting print quality. Plus I’m not even sure what kind of fasteners you’d be able to use to secure 1/4 inch plywood that would hold the weight of a paver and printer.
I made mine with pocket holes and glue. Disclaimer though, I am a carpenter. I’d say this a pretty good starter project if you want to get on YouTube and learn. This is basically a cabinet carcass mounted on the wall with French cleats to give you some terms to research. Good luck! Just holler at me if you have any questions.