Comment on bypass controller on a cheap LED strip
fuzzy_feeling@programming.dev 2 weeks ago
i’d check those two contacts.
with your description, the lower should be 12v and the upper gnd.
Comment on bypass controller on a cheap LED strip
fuzzy_feeling@programming.dev 2 weeks ago
i’d check those two contacts.
with your description, the lower should be 12v and the upper gnd.
dingdongitsabear@lemmy.ml 2 weeks ago
they are. and the voltage is fluctuating (for the fade in/out light effect) when measured there. so I need to find the fucker that’s doing that and bypass it.
fuzzy_feeling@programming.dev 2 weeks ago
is it fluctuating, because there is no load attached?
the fading as well as the color changing should be controlled by the three transistors next to the cables. the connections i highlighted are before those transistors, so there should be no fading at that point.
if it’s still fluctuating, if you have a load attached, i’d just go with some cheap 12v psu and call it a day.